This Bitmain Power Supply was intended to be an AntMiner Power Supply and works with: AntMiner S9I, AntMiner S9 and all previous AntMiner models as well as the Avalon 841, 821 etc. It can be used as a power supply for GPU mining and will support up to 5 cards that use 2x 8 Pin Connectors for power and is one of the best power supplies for mining.
Hot
Antminer APW7 New Power Supply PSU
$80.00
- Brand: Bitmain Antminer APW7
- Maximum output: 1000W @ 110v-120v, 1800W @ 220v-240v
- Accessories: The power cord is not included.
- Shipping Date:
- Ready Stock
- Description
- Additional information
- Reviews (0)
Description
The APW7 can deliver a maximum power of only 1000W if it is connected to a 110V mains power supply. To obtain the rated power of 1800W, the APW7 must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
Miner Specifics
DC Voltage | 12.0V |
Rated Current(220V input) | 150A |
Rated Power (220V input) | 1800W |
Rated Current(110V input) | 83.3A |
Rated Power (110V input) | 1000W |
Ripple & Noise | <1% |
Voltage Accuracy | 12.0-12.5V |
Source Regulation | <1% |
Load Regulation | <1% |
Setup, Rise Time | <2S |
Power off Protection Trip Time | >10mS |
Voltage Range | 100-264V AC |
Frequency Range | 47-63Hz |
Power Factor | >0.99(full load) |
Leakage Current | <1.5mA(220V 50Hz) |
Low-voltage Input | 80-89V AC |
Output Short Circuit | Yes |
Output Overcurrent | 150-200A |
Overheat Protection | Yes |
Operating Temperature | -20-60℃ |
Operating Humidity | 20%-90%RH(non-‐condensing) |
Altitude | < 2000m |
Dimensions | 206*110*62mm |
Weight | 2.0kg |
Cooling Mode | force-‐air cooling |
Noise | 43DB |
Additional information
Brands | Bitcoin |
---|
Reviews
There are no reviews yet.